READER_HOST", "READER_PORT", "RESULT_HOST", "RESULT_PORT" options

Configuration of establishing reader connection with the host

In order to establish a connection between the reader and the host, it is necessary to correctly complete the following lines

• READER_HOST; - enter the RFID reader IP address, by default the value for the reader is 127.0.0.1
• READER_PORT; - enter the port that will be reserved for the RFID reader
• RESULT_HOST; - enter the host IP address, which will receive data read by the RFID reader
• RESULT_PORT; - enter the port number that is reserved for the host

Example:

READER_HOST;127.0.0.1
READER_PORT;5084
RESULT_HOST;192.168.2.188
RESULT_PORT;4001

If the connection data is entered incorrectly, the log file will save the failed connection attempt.

No Connection exists to the Host.

In addition, if the GPO ports are configured correctly, a light will light up indicating that there is no connection between the devices.

Return